SkyChin & Passion

Sorry for the late post,yesterday was too tired.[Opps..seems like everytime I'm talking about the same reason?Ya,But Not!..It's True really!=D]

As my entire desktop had down for mobo's failure,therefore we have to get a new mobo.But initially,Dad was not tend to get another pc one.But after a vast consideration,he said"We"ll need to have an alternative solution for computing"These words were out of his speech as finding out that old 754 mobo is almost kinda hard to find plus our family are really desperate of more than one desktop.

So fortunately,that day we managed to find back the old Socket7 Mobo plus bought a new rig as well.After that,thus limited time are not permitted sake,we rushed back to home right after the purchases.

Ready In Actions!



AMD Phenom 9550 2.2Ghz @[4 Cores respectively]

Biostar 790GX-128M
[The only board which spots a SB750 Southbridge as well as an HD3300 onboard graphics @ Below Rm400 despite I'm not running it as ady got the little beast-HD4850]

Sapphire HD4850 DDR3 512MB
[The cheapest 4850 among the stores that I found,with 800streams processor as well as 256bit ring bus,It's enough to give a kick off to my pc games ady!]

Things were ready,we decided to replace the spoiled mobo for the initiative steps.Although things are simple as predicted,but we have some situation during the time in detaching out the little chic.



After a long period of contact and hot environments between the heatsink and processor caused both to stuck together resulting stubborn thermal paste to stick on the heatsink.We managed to separate it after a long push and pok.Perhaps things would brought some avails at last.

After that,

We taken out the processor and carefully attach it to the new board.First time doing this stuff is really fucking scary.A single or a mere bend on the pin would resulting an inability to work especially for the processor following by the socket.



In a short period of 2hr,we've done in assemble and transplant the old rig into another an Itik Chasis.






Next,It's the new one's turn!

At first glances,readers please forgive me for emphasizing more on the mobo and graphics card's.





What we surprise was the heatsink ady came with the original heat paste.But we still applied one more layer of thermal paste for the maximum heat conducvity.



While the mobo comes with an exuberant vivid dimms and PCI-E colors.The passive NB and SB cooler gives a well tiny-built finishing.On the processor area,they provided some solid capasitor and 4 phase power for the maximum stability and durability.Despite the board are merely similar as the gigabyte one,but I could get this one at a lower price instead.

Finally,the most important aka Soul of the PC will be the Mighty HD4850!-The Beast.



With a Hunk Steel Heatsink and Fan,I assume that the blades are almost bigger than the processor one's.Oh gosh,this little hunk obtained 2 slots of places which more opposed to the conventional 4850 design.But I dont care about it,as long as it works flawlessly!But only with a shred of disapointment is the card didn't comes with any LED or UV lights which making it Not too aggressive.But who cares?The 4850GPU and DDR3 memory compensated all stuffs of cons and uglyness.

Nevertheless,the outsider of the whole things-The chasis.I'd cleaned and vacummed it before putting in the new rig.But overall,my smilodon works well on it!



Shaping the I/O net is also a lesson of calmness and determination.You could not make any mistakes in shaping it,once mistakes made.The rear appearances would be a BIG Ruined Significance!

After hours of hard works and faced circumstances!

1
2
3
4
5

SHOW TIME!



Whole day of efforts in assemble the PCs our ownself,we obtained much many of experiences in practical works thus are not found on PC Magazine or even Tech's Guides.Frankly,there are still much many of details regarding our assemble progress as time and efforts are limited.So I could not post all of them here,btw for your reading pleasure sake.I'd simply attached some shots which I did not able to elaborate ones.














Lastly,assembling PCs while watching TV without bending out the processor pins is very talented.[XD],btw we had many of incidents that happened outrageously despite we did not mention it here.Conclusion,it's a great experience for me and dad in assembling our PCs instead of letting the shops to do it.

Everything about the new pc were almost posted here regardless the results and benchies of 4850 haven't been attached here.But next time I"ll post it here plus the screenshots and camshots as well.=D

For the discerning readers,
I'm Pleasure in writing here =),
Thanks for Reading!